Search results

  1. alldodge

    1st time buying old boat

    Welcome If unable to get it started is because you or she does not know how, or is it something else? Not able to hear it run is a non-starter, I would pass It looks pretty good so was taken care of.
  2. alldodge

    I/O (Sterndrive) Conversion to Outboards

    Current boat is 394 inches, OB mount (56) extends hull to 406, OB extends another 36 ish = 442 so about 37ft See the weight moving around 60 inch to rear You might need a new trailer, or maybe moved the axles to the rear
  3. alldodge

    Broken Spark plug

    Remove distributor and then intake. Get a cardboard box and punch 8 small holes. When removing rockers and push rods put rods in holes and rockers next to them in order
  4. alldodge

    Alternator questions

    Guess I'm going to be scratching my head some, but every twin engine boat I've seen has 2 Alt's. Each motor charges it's own Bat, and one of them charges the house Bat
  5. alldodge

    Rought start idle

    Have you tried adjusting the idle stop screw?
  6. alldodge

    TD-14 (Hurricane Milton)

    For now only way to contact Scott is voice and text
  7. alldodge

    Boat wraps

    no
  8. alldodge

    Boat wraps

    Wraps are of no concern, many use them
  9. alldodge

    Power steering pumps

    Welcome Removed a pump Could have been leaking, Don't buy a boat without a test drive
  10. alldodge

    Need some help with a1977 Volvo Penta 3.0 Ignition System

    EST troubleshooting
  11. alldodge

    HIN

    Ok you went from one O to two O s that is fed up
  12. alldodge

    TD-14 (Hurricane Milton)

    Hope you don't need a marker
  13. alldodge

    Lower shift cable routing

    That question is a bit squishy The bearing should always be smooth, meaning turning should be real smooth. Note there should be no sloop as no play, wiggle Fresh grease will make it a bit tighter to turn but not that much more. Rotate the bearing a bunch of times and then feel if there is...
  14. alldodge

    TD-14 (Hurricane Milton)

    He needs a salt water proof marker to ID himself with name a SSN
  15. alldodge

    350 mag mpi sn ow396614 cool gen 3 no start

    The new pump assembly is 8M0047215 which I'm seeing almost $1800
  16. alldodge

    350 mag mpi sn ow396614 cool gen 3 no start

    Its best to copy the link in the upper bar then past it in the link button. Posting picks of your laptop is not very readable Always use the serial number to look up parts Fuel Module Item 35 is the hose
  17. alldodge

    350 mag mpi sn ow396614 cool gen 3 no start

    That needs a full rebuild if not replacement. I have not taken one of them apart but looking at manual 40 (cool fuel) it shows seals on the ends of the pumps, so right now I'm guessing nothing is broke.
  18. alldodge

    Lower shift cable routing

    Agree Most folks don't use any protection because it stays cool. Only time it would get hot is when impeller stops pumping water
  19. alldodge

    350 mag mpi sn ow396614 cool gen 3 no start

    They are manual valves so you can shut off a fuel supply. They are in the correct position for use, but could be clogged. The external pump will let you know if fuel can be pulled from tank
  20. alldodge

    Lower shift cable routing

    Pay no attention with the rear engine mount
Top