The iboats forum moderators are excited to announce that at this time it appears the iboats forums posting pictures function is working once again. Though we cannot promise for how long, we're hoping for indefinitely.
Hello everybody, I hope Ive posted in good section.
So far the season was pretty good but today during leaving our parking/docking spot in marina
we have caught rope in prop, it was in neutral or forward idle detend only.
The engine dies/stalled I didnt realised what happened, started again and...
Its used engine, I have got new valve cover gaskets and still was leaking oil into the bilge it looks like from front of the engine.
Can You please tell me how to be sure if #1 is in TDC? thanks
Hello my friends
I think I have leak at the front of the intake manifold from the silicon bead, i need to replace the gaskets.
Any tips when removing the intake mani?
Engine @ TDC? how to set it?
Any tips when removing ignition coil?
Thanks !!
Hello,
I have got Mercruiser 4.3L with 2BBL Carb, now its almost the end of the season and due to weather we have 1.5-2 weeks brake with boating. The carb was rebuilt 2 years ago
my starting procedure is 2 full throttles and starting the engine
after this 2 weeks brake when starting I had to...
Thanks, Yes i Know Summit racing. Bearings are not a problem but I mean about the voltage regulator and other stuff which will be good to change when I will have this at the bench...
i think its AC Delco Alternator 7Si
19020611
All the best!
Hello, i have got Mercruiser 4.3 2005 and noticed when warm engine my alternator is squeaking.
Can I replace by myself the bearing? I think it’s delco alternator.
There is front and the rear bearing which is more difficult to reach.
Should I replace the front one or the rear is also prone...
Thanks for clarity, and do you know Which one of 2 wires is for the gauge I should check?
But it worked before I put it in the trailer , after winter it’s gone…
Thanks , Can you tell Me How to ground the sender ?
Ok so
1. Cable connected to the Ground 1 side and 2 side to the wire from the gauge, should go to the right.
2. 12V Voltometer, 1 side to ground 2 side to wire from sender and should be 12V on the Display?
I will have to find trim gauge wires , can you tell me where to search? I think it will be 2 wires right?
But for the water temp sensor I’ve only 1 brown wire which goes to the sensor in the thermostat housing . Is that right?
But actually both trim and water temp sensors are dead, full to the...
1st step isn’t actually a grounding? Ground on 1 side gauge on the other = grounding right? I don’t get your instructions sorry I’m not English speaker like You
Hello thanks for fast reply. I’m good at turning wrenches but hate electrics :) can you please tell me how to check it. I have boat on the trailer so far … but wish to drop it finally
Hello
I wanted to put my boat into the water after winter.
Boat runs great with new impeller and exhaust gaskets BUT…
Trim gauge doesn’t work and water temp…
Before winterisation everything was fine…
How to check if the sensor is ok or check the signal to the gauges ?? Thank You for help
When I...