saltH2Odeprived
Cadet
- Joined
- Oct 30, 2007
- Messages
- 20
Just finished restoration of a 1960 Alumacraft FD. Here are some over all pictures, I will follow up with some before and after pictures. The motor is a 1982 Johnson 35 hp that I restored and the trolling motor is an all original 1956 Johnson 3 hp. The old paint that was inside of the boat was stripped, acid washed with a metal conditioner, seams and rivets sealed with Gluvit, primed with Alumaprotect epoxy primer, the floor is coated with blue Durabak and the seats painted using automotive enamel with extra polyurethane hardener added. I followed all of the original paint lines that were there when I started.
http://forums.iboats.com/attachment.php?attachmentid=39631&stc=1&d=1256090683
http://forums.iboats.com/attachment.php?attachmentid=39632&stc=1&d=1256090759
http://forums.iboats.com/attachment.php?attachmentid=39633&stc=1&d=1256090775
http://forums.iboats.com/attachment.php?attachmentid=39634&stc=1&d=1256090790
http://forums.iboats.com/attachment.php?attachmentid=39635&stc=1&d=1256090815
http://forums.iboats.com/attachment.php?attachmentid=39631&stc=1&d=1256090683
http://forums.iboats.com/attachment.php?attachmentid=39632&stc=1&d=1256090759
http://forums.iboats.com/attachment.php?attachmentid=39633&stc=1&d=1256090775
http://forums.iboats.com/attachment.php?attachmentid=39634&stc=1&d=1256090790
http://forums.iboats.com/attachment.php?attachmentid=39635&stc=1&d=1256090815