Appliance Guys.......Clothes washer fill issues

L

Limited-Time

Vice Admiral
Joined
Mar 30, 2005
Messages
5,820
Clothes washer manufactured by Electrolux, mdl# FWS1339AC0, SR# XC33704617. The water fill level under fills. What controls/confirms the correct water level?
 
L

Limited-Time

Vice Admiral
Joined
Mar 30, 2005
Messages
5,820
Re: Appliance Guys.......Clothes washer fill issues

Thanks for the link Bruce. And as near as I can tell, but defiantly on the 2 highest settings.
 
bigdee

bigdee

Commander
Joined
Jul 27, 2006
Messages
2,665
Re: Appliance Guys.......Clothes washer fill issues

Not sure about yours but most of these pressure switches have a adjustment screw....turn counter-clockwise to raise level.
 
bruceb58

bruceb58

Supreme Mariner
Joined
Mar 5, 2006
Messages
30,478
Re: Appliance Guys.......Clothes washer fill issues

I used to own a few laundromats and I tried the adjusting screw a few times. Usually when they fail, that might help for a little while but for me, I just replaced them out since my time was more valuable than messing with them. I had around 150 machines so always kept a few of the pressure switches in my parts stock because they failed frequently.
 
You must log in or register to reply here.
Top