Welcome Guest - Sign Up today
Welcome Guest - Sign Up today


No announcement yet.

98 Turbojet

  • Filter
  • Time
  • Show
Clear All
new posts

  • watersportsguy
    started a topic 98 Turbojet

    98 Turbojet

    I have a 98 4 Winns Fling (turbojet) with a 115 hp OMC engine. (115TJEUC).
    I picked up a "flush kit"(0437021) from my local dealer. It is threaded for hose and a has a half inch stem at a 90 degree angle with two grooves for O rings. I came home and am looking for the port/hose/inlet. The only thing I see is an open hole at the top of the jet housing an inch to the right of the jet actuation linkage. The hole is a tad too small for the flush nipple to be inserted. Is this the right spot/part. Hints...suggestions?
    Thx much

  • tmfeaster
    Re: 98 Turbojet

    Did the kit not come with picture instructions? You have to take the prop housing unit off the back of the turbojet. When you do, there is a hole on top that the kit fits in perfectly. You then push the housing back on (but not completely) to hold the hose and flushing kit in place.

    Leave a comment: