1997 OMC 115TJEUC carb rebuild/jetting

Joined
Jul 16, 2011
Messages
10
Gents, I have the above engine (turbojet drive) and am rebuilding the carbs. (carb bodies 335829-ET). The issue I have is that the jets don't match what was purchased from an OEM parts supplier. Idle air orifice pulled out is #36. New one is #39.
High speed fuel orifice pulled #67C. New jet is #68C. Carb casting indicates 8/94 manufacture. (idle fuel orifice matches with #22) Set up is dual carb, V4 90deg 115HP. Please advise. Thx!!
 
Top