Welcome Guest - Sign Up today
Welcome Guest - Sign Up today

Announcement

Collapse
No announcement yet.

pontoon tow bar?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • nasherfish22
    started a topic pontoon tow bar?

    pontoon tow bar?

    i am having a custom tow bar made for m 22ft 96 crestII do i have it made to bolt through the transom or do i bolt through the beams and or deck or both please help new to pontooning and a little confused thank you

  • Cubbyblue22
    replied
    Re: pontoon tow bar?

    OOhhh ok mine doesnt have these, i'm pretty sure mine just has handles in the same general location.

    Leave a comment:


  • rickdb1boat
    replied
    Re: pontoon tow bar?

    Like are on the top of this one.

    Click image for larger version

Name:	image2809.JPG
Views:	1
Size:	84.0 KB
ID:	6986080

    Leave a comment:


  • Cubbyblue22
    replied
    Re: pontoon tow bar?

    Probably a simple question, but what do you mean by the pontoon eyes??? I think I may have a clue but i'm not 100%

    Leave a comment:


  • 5150abf
    replied
    Re: pontoon tow bar?

    That can bend them to, it happens at work now and then, it is just that the metal that they are welded to is pretty thin, it does what it is suppose to very well but isn't indestructable.

    We use the eyes to load tha boats so they will take a tremendous load but in a straight pull.

    Leave a comment:


  • Cubbyblue22
    replied
    Re: pontoon tow bar?

    I would just go to your local welder and ask him to make you up one. Make the configurations and write out the dimensions for him to make sure you get them lined with the crossmembers. This way you'll be sure your rope is up and out of the water and really it wont cost you a lot.... I know a welder close to me that would make me one for under $100.

    Leave a comment:


  • goldnrod24
    replied
    Re: pontoon tow bar?

    Originally posted by 5150abf View Post
    I don't like it, the eyes are really stout but they are welded to the end caps which are only .080, as long as you keep the pull as straight as possible it will probably be okay, it is cross loading them that will bend them and possibly cause a leak.
    So then, what's your take on using these eyes to tie down to a trailer? It seems there's cross loading there, too.

    Leave a comment:


  • 5150abf
    replied
    Re: pontoon tow bar?

    I don't like it, the eyes are really stout but they are welded to the end caps which are only .080, as long as you keep the pull as straight as possible it will probably be okay, it is cross loading them that will bend them and possibly cause a leak.

    Leave a comment:


  • rickdb1boat
    replied
    Re: pontoon tow bar?

    5150, what are your thoughts on using the pontoon eyes for towing tubers? I will say that I don't tow tubers very often, but have never noticed any damage from it using the "Y" harness.

    Leave a comment:


  • 5150abf
    replied
    Re: pontoon tow bar?

    Anywhere on the back is fine, just make sure you hook a cross member, probably best if it is close to the bolts so it is as strong as possible.

    Leave a comment:


  • Cubbyblue22
    replied
    Re: pontoon tow bar?

    Where exactly would you mount the Seadog Transom Mount??? With the motor being in front of your transom, do you just mount it on the side near a crossmember???

    Leave a comment:


  • 5150abf
    replied
    Re: pontoon tow bar?

    tow bars have an enormous amount of force on them so if you can get it in front of a cross member and go clear down to the motor pan and attach it really well there, you at least want it bolted to to several cross members with rear facing braces.

    Have you looked into something like this http://www.iboats.com/Seadog-Transom...-view_id.39715

    Easy to install and it will work fine.

    Maybe call Crest and see if they can retro fit one to your boat then it would be designed for your baot and you know it would work.

    I have seen 6'' diameter 1/2'' wall alumiunm tow poles that were bent so it woud be pretty hard to design your own and have it work and you could really jack up your boat or hurt someone if your design failed.

    If you are dead set on doing this make sure you bolt through at least 2 sets of cross member, just going through the deck and it would rip off the first time you used it, again you are dealing with hundreds and hundreds of pounds of force here.

    Leave a comment:


  • Silver Eagle
    replied
    Re: pontoon tow bar?

    That's what I need for my pontoon boat. I want to use it for my rear anchor. It's to hard try to reach my rear cleats.

    Leave a comment:

Working...
X