Today my outboard gave me a low oil alarm and the motor lost power. My remote oil tank was full so I assume the sending unit(s) or pump has taken a puke. I tried the override switch on the motor by the smaller resevoir. It never pumped up so I was stuck idling back to the ramp.
I can't find my service manual at this time. I was hoping someone would tell me the diagnostic steps to test the sending units?
The oil feed pump should be straight forward to test with 12V.
I can't find my service manual at this time. I was hoping someone would tell me the diagnostic steps to test the sending units?
The oil feed pump should be straight forward to test with 12V.