murray8144
Recruit
- Joined
- May 25, 2009
- Messages
- 2
I'm cleaning and rebuilding the carbs on my 2005 90TLRD, first time i've ever attempted this, and have a couple questions.
1st - When I take off the carb bowl, I see the two jets, but there's a rubber plug covering up the idle jet, never read or saw anything about this in my research. Each of the three carbs had this plug.
2nd - what is the purpose of the throttle linkage on the bottom carb, seems to originate from the fuel pump
3rd - Am I wasting my time by cleaning the carbs, and not cleaning out/replacing the fuel pump, hoses, etc.?
Thanks for your help all.
1st - When I take off the carb bowl, I see the two jets, but there's a rubber plug covering up the idle jet, never read or saw anything about this in my research. Each of the three carbs had this plug.
2nd - what is the purpose of the throttle linkage on the bottom carb, seems to originate from the fuel pump
3rd - Am I wasting my time by cleaning the carbs, and not cleaning out/replacing the fuel pump, hoses, etc.?
Thanks for your help all.