joeboat1953
Recruit
- Joined
- Nov 3, 2009
- Messages
- 1
I have a 1990 150HP yamaha outboard. I do not get to use it much. It will crank if remove the black cover and spray carbuerator fluid into carbuerator.
If it sits for 45 minutes it will not refire unless we do the above. I changed the plugs, put stabilizer in gas. Hasn't been in water in 2 years. Is there anything that will help?
It also idles too low at about 500 rpm. Can I adjust the idle?
If it sits for 45 minutes it will not refire unless we do the above. I changed the plugs, put stabilizer in gas. Hasn't been in water in 2 years. Is there anything that will help?
It also idles too low at about 500 rpm. Can I adjust the idle?