1986 Yamaha 130 want to remove oil injection ???

fishon71

Chief Petty Officer
Joined
Jul 21, 2002
Messages
575
I have a 1986 Yamaha 130 and would rather mix my oil with the gas than trust this oil injection system. How do I disconnect the injection system? After that do I just run 50:1 oil to gas mixture like the old days? Am I crazy to want to do this?
 

WillyBWright

Fleet Admiral
Joined
Dec 29, 2003
Messages
8,200
Re: 1986 Yamaha 130 want to remove oil injection ???

I never heard of any problems with Yamaha's injection system. There was an inline checkvalve update once upon a time, but I think that was about the only thing. And that was just an upgrade, nothing serious. The problems I hear most about involve early Johnnyrude VROs and Merc's pump drive gear failures. That was back around 1986. The American companies were playing catch-up. Japaneese outboards had them first (not including those funky Accumix and Autoblend gadgets).
 

fishon71

Chief Petty Officer
Joined
Jul 21, 2002
Messages
575
Re: 1986 Yamaha 130 want to remove oil injection ???

Any Idea when the USA started importing and selling big Yamaha outbourds (100HP & up)?
 

Ray Neudecker

Lieutenant Commander
Joined
May 25, 2004
Messages
1,656
Re: 1986 Yamaha 130 want to remove oil injection ???

The earliest models imported were 1984's. There were some oil injection gear problems with Yamaha through the 1986 models before changing the drive gear.<br /> Removing the oil injection from that model involved removing the parts including the oil pump and drive shaft for the pump and blocking the hoses to the intake.<br /> A plate is available for the oil pump hole off the consumer V-4 or V-6 models or a nickel and some DEvcon or JB weld can be used to block the hole.
 

fishon71

Chief Petty Officer
Joined
Jul 21, 2002
Messages
575
Re: 1986 Yamaha 130 want to remove oil injection ???

What needs to be done to a 1988/130HP to delete oil enjection?
 

Ray Neudecker

Lieutenant Commander
Joined
May 25, 2004
Messages
1,656
Re: 1986 Yamaha 130 want to remove oil injection ???

The 1988 model is almost identical. Same procedure as the earlier model.
 

mark n dark

Cadet
Joined
Mar 12, 2005
Messages
9
Re: 1986 Yamaha 130 want to remove oil injection ???

disconnected oil system 11 years ago after changing power head.<br />removed eng drivin oil pump put plate over block<br />plugged line going to carbs removed all electrical did not rejet carbs <br />never had any problems<br />engine will smoke alittle more<br />plugs were change every 6mo.<br />ran the cheapest 2 stroke oil i coudld find usually havaline<br />mixed aproa 50-1<br />somtimes 75-1 with no problems<br />engine lasted 2000hrs before repalce with 4 stroke good luck
 
Top