Help with part number for 98 Volvo Penta 3.0 SX Cobra

KAnsasgijoe

Recruit
Joined
Jun 26, 2012
Messages
3
The wires going to my tilt/trim sensor were corroded off at the sensor when I bought the boat. I would like to replace the sensor but can not determine the part number. It is a two wire sensor. The date plate is missing from the engine so I can not determine the exact model but by the process of elimination I believe it is a 3.0 GSM. It's hard to tell but the pictures of part # 3594989 appear to match. Any help would be appreciated.
 

nitwhit

Seaman
Joined
May 22, 2010
Messages
56
Re: Help with part number for 98 Volvo Penta 3.0 SX Cobra

That should be looked up using the drive model not the engines. Get the full model # of your drive off of the tag on it and use the drive & transmission parts tab here
 

KAnsasgijoe

Recruit
Joined
Jun 26, 2012
Messages
3
Re: Help with part number for 98 Volvo Penta 3.0 SX Cobra

That should be looked up using the drive model not the engines. Get the full model # of your drive off of the tag on it and use the drive & transmission parts tab here

If I had a data plate on my lower I could do that, unfortunately it does not have a plate and I can not find a model other than the SX Cobra designation which I know is not the model number.
 

KAnsasgijoe

Recruit
Joined
Jun 26, 2012
Messages
3
Top