Welcome Guest - Sign Up today
Welcome Guest - Sign Up today

Announcement

Collapse
No announcement yet.

Identifying correct seal kit on a Duoprop drive

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Identifying correct seal kit on a Duoprop drive

    I have a 2003 Crownline with a VP Duoprop drive. The transom shield says type SX-MHP but I’m not sure that narrows down the drive model. Searching on the web has led me to believe that I need seal kit p/n 3856002 but I’m trying to confirm. Any help is appreciated.

  • #2
    go thru the link on iboats https://www.iboats.com/shop/engine-parts

    that takes you to http://www.volvopentastore.com/

    and get the appropriate seal kit that is associated with your drive serial number

    Cheesehead boating the Gulf Coast of FLA 27.51° N, 82.53° W

    1988 Cruisers Rogue 2420 -VP 290 DP now powered by custom 468 - https://forums.iboats.com/forum/owner...988-rogue-2420

    Past Boats
    1970 Wooster Hellion - Merc 9.8
    2002 SeaRay 190BR - 5.0 - A1G2 - "Cheeseheads in Paradise"
    1984 Avanti 170DLI -3.0 stringer- "Ship Happens"

    What’s behind you doesn’t matter.Enzo Ferrari

    Comment


    • #3
      If you can’t by the above link. Key parts have a great search thing. In the U.K. but will get you info.

      Comment


      • #4
        Sign up today
        There should be a small stainless plate behind the Port side trim piston with the part number on it, use that number in your online search. I came up with this:-
        https://www.powerproductsystems.com/...ult/?q=3856002

        Cranchi Ellipse 21
        5.0Gi (PWTR) 1999.
        DP-SM outdrive

        Comment

        Working...
        X