385 PERFORMANCE TUNE – ENGINE ONLY 8M0064807 385 Performance Tune Bravo Sterndrive Engine Only. 350 HP @ 5200 RPM. 385 Cubic Inch Stroker Fully Dressed Marine Engine. Engine Features: Remanufactured 4.040" Bore GM 4‑bolt Main V8 Marine Iron Block, Multi‑Port Fuel Injection Using Cool Fuel II, Dry Joint Exhaust, 100 PSI Oil Pump, 4340 Forged Steel Crankshaft, H‑beam Forged Steel Connecting Rods, 9.0:1 Forged Pistons, Special 302 Windage Tray, Mercury Cylinder Heads Machined with Rocker Studs, Multi‑Layer Steel Head Gasket, High‑Lift Billet Steel Camshaft, Stainless Steel Intake Valves, Nickel‑Alloy Exhaust Valves, Copper Oil Cooler, Oil Thermostat, Remote Mount Gear Lube Reservoir Kit, Water Pressure Relief Valve Kit, and 1.6:1 Full‑Roller Rocker Arms. The 385 PT uses ECM555 with Engine Guardian and is SmartCraft ready, 10‑Pin Harness. Flame cover not included. By design, oil consumption of one or more quarts every 5 hours may be typical. Fresh Water Cooling not recommended ‑ call for further application assistance. 350 HP Remanufactured Sterndrive Engine Replaces 383 Mag Stroker MPI sterndrive engines
I was surprised to see this engine in the Mercury repower catalog. only $14,156.25 and by design it could burn one or MORE quarts of oil per 5 hrs of operation? Not sure whats up with that, but a least they note it in the catalog.