Engine mounts

Mike63

Recruit
Joined
Dec 18, 2018
Messages
4
First boat and first time in here,so bare with me, project boat 90 invader not to bad of shape needs repower engine out lag bolts rounded heads off any guide lines or trick for these ? And no there not spinning in the wood,any help and guidance don’t want to tear anything up.
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
47,306
welcome aboard

not sure what motor you are dealing with - assuming an I/O

however grind off the heads, pull the motor, then use vice-grips to get the remainder of the bolt out.
 

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
70,467
Ayuh,.... What Scott said,...... or weld big nuts on top or the rounded off bolt heads,......

the heat might help break the rust free,....
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
47,306
Ayuh,.... What Scott said,...... or weld big nuts on top or the rounded off bolt heads,......

the heat might help break the rust free,....

or set the oil in the bilge on fire....
 
Top