Welcome Guest - Sign Up today
Welcome Guest - Sign Up today

Announcement

Collapse
No announcement yet.

What Rinda diacom cable needed for this Indmar model? mefi4 or 5?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • What Rinda diacom cable needed for this Indmar model? mefi4 or 5?

    Hi- need to know what cable I need for this model? MEFI4 or 5? I wd think 4but it has the silver ECM with 3 plugs attached-

    7INDM05.7CAT 5.7L
    MODEL: 057676
    ENGINE: 129399

    MFG DATE: 06/28/2006

  • #2
    Sign up today
    Would suggest confirming with Rinda, but accordong to page 29 of the manual

    The type 1 (3-connector) GCP module was a direct retrofit for the GM-Delphi
    MEFI-5 modules used on Indmar’s production engines in the 2006 thru 2009
    model years. Type 2 modules are used on Indmar’s current production engines
    (mid-2009 and newer) and have Indmar’s logo cast into the ECM housing.

    The TechMate Pro scan tool fully supports both the type 1 and type 2 modules
    with an extensive set of diagnostic functions. Both type 1 and type 2 modules
    require use of the #94029 scan tool CAN network adapter (shown above) for
    diagnostic communication.

    Diagnostic functions for both the type 1 and type 2 GCP modules are identical
    to those described in the Volvo Penta EGC section of this manual. Please refer to
    page 21 for a comprehensive description of the available functions.
    So I'm thinking 94029


    http://www.rinda.com/acro/TechMate_Pro_User_Guide.pdf
    94 Formula 27PC Custom 509MPI MEFI3 , B3 XR
    95 Rinker 232 w/ 7.4L Carb 0F425011 B1 0F486471
    07 Seadoo GTX
    Merc Adults Only VP Adults Only
    G-Dad always said "First Liar doesn't stand a chance"

    Comment

    Working...
    X