Welcome Guest - Sign Up today
Welcome Guest - Sign Up today

Announcement

Collapse
No announcement yet.

connectin a mariner 40 Hp 1980 (japanese) to a yamaha 703 remote

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • connectin a mariner 40 Hp 1980 (japanese) to a yamaha 703 remote

    Hi there

    I have a mariner 40 hp 1980 "made in japan" I also have a remote from yamaha 703. I would very much like to connect these two. The previous owner found i neccesary to cut the cables. So i do not have the proper connectors.

    I have tried to connect and mannaged to get the thing working. But not the idle throttle.
    Anyone with a wiring diagram fpr the remote and the engine.

  • #2
    Sign up today
    Re: connectin a mariner 40 Hp 1980 (japanese) to a yamaha 703 remote

    The idle throttle controls the center conductor of the throttle remote cable. The control box knows not what is on the other end of the cable. If you can control your engine throttle with your yammie box, then you should be able to control the idle speed i.e. fast idle function. If not look at the box for the problem, not the engine/cable interface.

    Mark
    If you are new to boating or have a new boat, a knowledgeable friend could show you how to operate your boat and save you a lot of grief, maybe some money, and maybe your life.

    Comment

    Working...
    X