Motor stand

[merc850]

If you need a stand for displaying/working on your small Mercs this is my design for a cheap but solid unit. I made 2 and all I used was 1 sheet of plywood for each one; some screws, a circular saw, Sawzall and drill. You can use a router to dress-up the edges or create inlays.

 

[Scott Danforth]

i used scrap 2x4's for mine. will hold 3 outboards

 

[Alumarine]

If you need a stand for displaying/working on your small Mercs this is my design for a cheap but solid unit. I made 2 and all I used was 1 sheet of plywood for each one; some screws, a circular saw, Sawzall and drill. You can use a router to dress-up the edges or create inlays.

That looks great, thanks for the plans!