hardwater fisherman
Lieutenant Commander
- Joined
- Mar 19, 2010
- Messages
- 1,725
I bought a new lever and idle wire. The wire was missing and the groove in the lever was damaged and it would not move while turning the knob. The new lever is part number 12805 3. It seems to be the correct one. But the old one is part number 12805 4.The new one molds around the carb and the carb cover and the old one bends away from the carb and the fuel line is in the way and the wire does not pass it. The biggest issue is the the wire does not advance the timing because it is too long. The picture of the idle wire is with the knob turned fully to the right. The last picture is the old lever.