Re: sealant on head bolts
Well, your problem isn't covered in any manuals, and like every opinion, someone else has a different one. I would suggest you try doing it one at a time. Clean that F*#@$ing anti sieze off the bolts and the threads as much as possible before putting on the sealer. Put some grease on the head of the bolt where it contacts the head and sealer on the threads and retorque one at a time and you should be fine. Don't forget to drain the water out of the block before you start.<br /><br />And just a note here, next time you want to use a product that is different from what the manuals say, make sure what you are using will do the job BEFORE you use it.