Re: Pulling a Boat Motor
To pull my engines out of my boat which is about9' to 10' up,I had put 2,4"x6"x16' up right in the ground about 2',space 24' apart,off the 4"x6",I had installed some 2"x6"x14' on a 45 angle down.In between the tops of the 4"x6" I install a 6" I beam.From there I installed a trolley with a come-along.I was able to pull the engines out the side and lower them on to a trailer to more them to my shop.Problem was,my boat is on blocks.<br />Now that I have reinstall everything,its about time to pull all that down.Should have my boat back in the water sometime in Sept.Been a long year,was dry dock Labor day weekend last year for a complete rebuild from the fuel tanks,plumming,elec system and more.Will I ever do a boat this size again,NOT NO BUT HELL NO!And ya'll guys think one motor is a *****.Trade?