OMC 3.0 Firing Order

cimy3

Petty Officer 3rd Class
Joined
Jul 24, 2003
Messages
97
Does anyone know the firing order for a 4 cylinder omc engine? Thanks.
 

rbezdon

Senior Chief Petty Officer
Joined
Jun 20, 2004
Messages
689
Re: OMC 3.0 Firing Order

I have a Clymers for 86 to 93 and all are the same. 1, 3, 4, 2 with the #1 being the cyliners most forward in the boat.
 

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: OMC 3.0 Firing Order

vatter41<br />I would be careful about quoting anything from a Clymers manual. There is so much wrong information found in them it's scarry.<br />Lots of instanses where posters quote the Clymers manual as to what they did only to find out it was bad information.
 

rbezdon

Senior Chief Petty Officer
Joined
Jun 20, 2004
Messages
689
Re: OMC 3.0 Firing Order

Thanks Don but I have already found this out on the drive side, not as much on the engine side. Unfortunately, I dont have the original OMC manual. I bought the boat used and had no documents with it. I bought the Clymers as it was the best thing I could get at the time.
 
Top