HELP! How do you install the fitting on the Nylon trim hose? PIC

Friscoboater

Captain
Joined
Jul 3, 2009
Messages
3,095
I have been banging my head on the wall on this for about two hours. My nylon trim hose has a leak and I am trying to replace it. The little brass ferrule looks to be smaller than the hose (see picture) and I cannot get it on the new hose (which is the exact same size). Is there a trick to this? I tried cutting the tube at an angle... nothing. I tried pinching the end... nothing. I tried lube... nothing.

These stupid little details are really starting to make me tired of this project.

Here is a picture of the old tubing with the ferrule still installed. Anyone know a trick?

DSC00093.jpg
 

a70eliminator

Captain
Joined
Sep 9, 2007
Messages
3,688
Re: HELP! How do you install the fitting on the Nylon trim hose? PIC

Easy answer, the ferrels are for one time use only, your ferrel has already been pinched down, it's simple you need a new one, looks like 3/8 and any hardware store should have them in the plumbing dept.
 

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
70,465
Re: HELP! How do you install the fitting on the Nylon trim hose? PIC

Easy answer, the ferrels are for one time use only, your ferrel has already been pinched down, it's simple you need a new one, looks like 3/8 and any hardware store should have them in the plumbing dept.

Ayuh,... Exactly,...
 

Juniinc

Petty Officer 1st Class
Joined
Jan 16, 2010
Messages
221
Re: HELP! How do you install the fitting on the Nylon trim hose? PIC

deformed circle ring whenever they are pinched down.
Being a plumber, we deal with this a lot. Yes a new piece would be nice,,,
if not, with some soup put the outter nut behind that ring then tap it in.
 

Friscoboater

Captain
Joined
Jul 3, 2009
Messages
3,095
Re: HELP! How do you install the fitting on the Nylon trim hose? PIC

Ahhhhhhhhhhhh. Thanks alot guys. I love this place!
 
Top