how to repair threaded shift cable threads if destroyd removing the cable

Bt Doctur

Supreme Mariner
Joined
Aug 29, 2004
Messages
19,093
Here you go 39/64 drill bit ..6094 , 1/4 inch pipe coupling, 1/4 x 18 NPSF tap , Red Loc-Tite.
With 1 hex machined off, the O.D of the sleeve is .619 leaving a .010 press fit. Once installed tap it thru if preferred but only a 5/8ths depth is needed for the shift cable threads
If needed PM me if you want it done

The new coupling
DSCN4596.jpg

After some machining
DSCN4597.jpg

Installed
DSCN4600.jpg



 

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
70,469
Ayuh,.... another Great work-around to salvage expensive parts,.....

Brought to us by BD,.......
 
Top