flashback
Captain
- Joined
- Jun 28, 2002
- Messages
- 3,651
Hey guys, been a long time but I'm back...I recently picked up a 15hp omc 2 stroke for a small hydro I built, about mid 80s model, and I am trying to hook up an old quincy deadman throttle to it but the advance plate has too much resistance for the cable...If I take the flywheel off then the plate moves easily, but it seems when the wheel is back on the magnets create resistance...was wondering if I could just pin the plate at WOT and then just hook the throttle cable directly to the carb..........Thx,,,,,,,,,,,