trendsetter240
Lieutenant
- Joined
- Jun 22, 2009
- Messages
- 1,458
I'm currently breaking in my 1995 Evinrude 70hp ELEO after a complete rebuild. I installed wiseco forged pistons as part of the rebuild.
My mechanic today told me that I need to follow a more extensive break in process for the Wiseco pistons than I would with the OEM pistons.
Does anyone know what the proper break in procedure is? I have currently ran the engine at idle varying between 650 and 1200 rpm for 1.5 hours. VRO pump has been disabled and I am running 25:1, 91 octane ethanol free gasoline.
Thanks for your help.
My mechanic today told me that I need to follow a more extensive break in process for the Wiseco pistons than I would with the OEM pistons.
Does anyone know what the proper break in procedure is? I have currently ran the engine at idle varying between 650 and 1200 rpm for 1.5 hours. VRO pump has been disabled and I am running 25:1, 91 octane ethanol free gasoline.
Thanks for your help.