Terry Olson
Chief Petty Officer
- Joined
- Aug 20, 2005
- Messages
- 415
I'm running a 2004 Johnson 50 2 stroke on my 1994 Lund tiller boat. The VRO system is still in use. The engine warning system has four lights - "no oil", "water temp", "check engine", and "low oil". I'm experiencing a "check engine" light with steady warning alarm. The engine runs like it should (not in SLOW mode), seems to be using oil, and shows a strong telltale stream. I can't find any troubleshooting procedures. The owner's manual speaks to the oil and temp warning alarms but it says nothing about the check engine one. I see that some are equipped so that the fault code may be read, but I haven't found any way to do this with mine. Where do I start? I'll add that I've inspected the motor an I find nothing unusual visually.
Thanks in advance for your time and advice.
Terry
Thanks in advance for your time and advice.
Terry