How Do I Remove Plastic Inspection Covers - Upper Unit ?

90HP_Evinrude

Recruit
Joined
Jun 26, 2018
Messages
2
1989 90 HP Evinrude 2 Stroke:
Just below the Engine Pan(?) there is another plastic cover with 4 - 5/16" screws - removed those -
Now it seems cover is bolted by some "hidden" bolts - are these the motor mounts? Or some other upper unit bolts -
it is very hard to determine what/where exactly this plastic cover is attached beyond the 4 exterior 5/16" screws.
Don't want to break it trying to force it off of there!!
Thx!
MG
 

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
There are two bolts in the rear, accessible from inside the lower pan. Once that cover is off, you'll have access to the two remaining bolts holding the front 1/3 of the 2-piece cover in place.
 
Top