1992 Evinrude TE115TLEND Pee Hole 115HP 2 stroke

[GatorbOi334]

I have a hose for a water pump drain. Problem is it's not connected to anything and I don't see anywhere to connect it on the motor. There is no water draining from the inside the motor housing anywhere. Does anyone know where this hose connects and maybe have a picture. I have no been able to find any pictures online. Thanks for any help.

 

[racerone]

You are sure that is a water pump " drain " or is it a feed for a speedometer ?-----Is this on the front of the lower unit ?

 

[interalian]

The overboard indicator (pee hole) connects to the bottom starboard area on the exhaust cover (bubble style) close to the lower cylinder. Theres's a plastic 90 degree fitting there (or should be there). A hose runs up from there, over the starboard cylinder head, then down to a fitting on the motor pan. This is not a water pump drain.

 

[GatorbOi334]

I don't have a speedometer everything is original on the motor and instrument panel. So interalian there is no pee hole on this motor? I took it to a motor shoo and had it ran through when I first got it they didn't attach the hose to anything either

 

[racerone]

There was a " pee hole " when it left the factory 25 years ago.----What it has today needs to be shown with pictures.

 

[interalian]

Pictures please.

 

[GatorbOi334]

I will take some pictures of it when I get off work this afternoon and post them. Thanks

 

[GatorbOi334]

[No message]

 

[GatorbOi334]

[No message]

 

[GatorbOi334]

[No message]

 

[racerone]

The white hose that comes off the pee hose fitting now goes to a pressure gauge at the helm I would say.--------Not sure if that is the right way to go to a pressure gauge.----Usually it come off a tee in the pee hose !!

 

[GatorbOi334]

So the white hose coming off the motor is actually connected to the pee hole. I'll try unhooking that and see what happens if need be I can splice it. Will a regular water T work

 

[GatorbOi334]

The hose to the pressure gauge.

 

[GatorbOi334]

She's peeing lol thanks racerone

 

[racerone]

??-----The hose to the gauge now comes off the fitting that was used at the factory for the pee hose.----I can not explain this any other way for you.

 

[GatorbOi334]

I know what you were saying that worked thanks for your help racerone

 

[interalian]

The pee line needs a fitting in the motor pan to provide a restriction to flow. You connect that to the angle fitting on the back of the motor which as I mentioned before is looped OVER the starboard cylinder head (supposedly an aid to preventing air blockages). You can put a tee anywhere in that line and attach it to that white line that goes to the pressure gauge.