hunter200v6
Recruit
- Joined
- Jul 18, 2017
- Messages
- 1
I recently picked up my boat from a mechanic who had it for around 6 months (was originally supposed to be a 2 week job). I got tired of waiting on him. He replaced the power pack to fix the ignition issue with my boat but that did not work so he instead suggested that the problem was the timer base. Upon getting the boat back in my garage I replaced the timer base myself with a CDI version. However, when putting everything back together I learned that my mechanic did not finish connecting all the wires that go to and from the power pack and he apparently still has the bolts which hold the power pack in place in his possession. I'm pretty sure I can locate the correct bolts to replace the ones that are missing so that's not really an issue. However, I have spent hours upon hours scouring the internet in search of a detailed wiring diagram to correctly wire my power pack back in. I feel pretty confident that I have most all of the wires properly connected based on the vague diagrams that I've found on the web and just due to the fact that they're color coded. I don't want to run the risk of firing up my motor to adjust the timing, since I installed the new timer base, and something going wrong. Any assistance, more detailed wiring diagrams would be greatly appreciated!
1990 evinrude v6 200hp
1990 evinrude v6 200hp