Universal control box

[Asnyder19]

So im wondering if something like this https://rover.ebay.com/rover/0/0/0?m...2F362652999905
Would work on my 89 force 125. The force has 8 wires. Im thinking maybe I could wire it in right?. I can't find a decent control box anywhere. It's going in a less crappy boat so I would like it to look less crappy.

 

[jerryjerry05]

That one probably won't work.
Contact the seller and see if they carry one for a Force.

The Force (OEM) shifters didn't have the wire harness.
The older Chrysler had the wires but they didn't include the T@T wires.

This will work but you need the harness that comes with the boat.
https://www.ebay.com/itm/Chrysler-F...175867?hash=item3d73c32cbb:g:bBQAAOSwx5hbmqnv

 

[kbh121956]

There are a couple of different controls on ebay. Also there are some main wiring harnesses. Do you need both? The Chrysler control will work but as Jerry said the wiring harness with Chrysler's, they use a separate 3 wire harness for the tilt. A person can always paint a used control to make it like new. Keep looking on ebay as these control boxes come and go daily.

 

[Asnyder19]

I do have the wiring harness so really all I need is the box. I would really like to have the key on the box if I could. Really appreciate all your help guys, thanks!

 

[jerryjerry05]

The Chrysler boxes will work.
And if your REAL LUCKY!!!!!?????
You might find a box with T@T in the handle????
They made a few, I saw ONE a long time ago.

 

[Asnyder19]

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/163634257249

What about this one fellas?

 

[jerryjerry05]

Yup

 

[kbh121956]

You found one. Not a bad price either. Keep us posted and good luck.

 

[Asnyder19]

Thanks! Ordered it.... now the wait! Appreciate all the help!

 

[Asnyder19]

Little update guys, had to get a new trim switch but I got everything in and works great! Now I just need to figure out what model my motor is exactly so I can get an impeller repair kit The water coming out is looking a little weak.