can someone PLEASE help ID this lenco system? 04 chapparal sig 260

CamaroMan

Petty Officer 1st Class
Joined
Mar 18, 2016
Messages
323
Been trying to find a match for this lenco system on a customers boat-

I havent been able to get a pic of the controller but would I need the whole kit or get by to just replace the external hardware? Im contemplating having a duplicate plate made of marine SS for the port side and replacing the rams-

tx
 

Attachments

  • photo333283.jpg
    photo333283.jpg
    151.1 KB · Views: 0
  • photo333284.jpg
    photo333284.jpg
    145.4 KB · Views: 0
  • photo333285.jpg
    photo333285.jpg
    155.8 KB · Views: 0
  • photo333286.jpg
    photo333286.jpg
    179.3 KB · Views: 0
  • photo333287.jpg
    photo333287.jpg
    173.8 KB · Views: 0
  • photo333288.jpg
    photo333288.jpg
    202 KB · Views: 0
  • photo333289.jpg
    photo333289.jpg
    1.2 MB · Views: 0

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
47,296
lenco only hast two lengths of actuators - 4" and 8" with and without feedback. so the actuator is easy
 

dingbat

Supreme Mariner
Joined
Nov 20, 2001
Messages
15,413
Boy is that a mess.

The whole system should be replaced in its entirety. Cheaper than piecing things back together.

Tabs where most likely stainless to begin with.

I’ll keep the virtues of mixing water and electric motors to myself...lol
 
Last edited:

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
47,296
I would start by cleaning the barnacles off the tabs. use toilet bowl cleaner with acid, (or a mix of muriatic acid and water)
 

CamaroMan

Petty Officer 1st Class
Joined
Mar 18, 2016
Messages
323
I would start by cleaning the barnacles off the tabs. use toilet bowl cleaner with acid, (or a mix of muriatic acid and water)

I will - issue is the entire port side is missing - I havent torn into it yet - I havent found a matching lenco plate that has the same shape - thats the issue im having..

good to know on the lenco actuators - this is a 8" then - and powered. I will try find a supplier near me as ive been calling around for over a week and keep missing everyone. season has gone off like a rocket -
 

CamaroMan

Petty Officer 1st Class
Joined
Mar 18, 2016
Messages
323
i think ill just match the width and length and pop a new kit in- dont see too much of a difference with those small vert sides - probably just reduces side splash if anything..
 
Top