Battery swap out difficulty for Southwind 2013 200SD

WChason

Recruit
Joined
Sep 17, 2017
Messages
1
If anyone is familiar with 2013 200SD Southwind ?

My issue is there is not enough room to detach wiring and not enough room to remove battery.

Any instruction, advice, or experience would be very helpful. Thanks
 

Grub54891

Vice Admiral
Joined
Jun 17, 2012
Messages
5,908
Not familiar with your setup, but take some pullties, wrap around each set of wires on each terminal, so you don't get them mixed up. disconnect the terminals. I've seen some you have to take the battery put of standing on end. Or there may be a removable panel on the side to gain better access.
 
Top