1984 ProCraft 1750v - Full Restore Project

SmallSaddleWedgie

Seaman Apprentice
Joined
Jul 4, 2016
Messages
40
Last year I purchased a 1984 Procraft 1750v. It needed 'TLC' so we took it out a few times, then stored it for the winter.
Sunday, I decided to pull the carpet and get ready to touch it up and replace the carpet (which was worn).
Lo and behold... it was a "Deck Over".

Looks like there's a full restore a'brewing and I figured I might as well document it here.
I've patched up Canoes and Kayaks, and done my share of flat bottom aluminum work.
I'm a wood worker and blacksmith by hobby, and a mechanic by experience, but never restored a full boat.
Should be fun.

at the time of the pictures, I'd already removed the cleats, rails, and the trolling motor.
 

Attachments

  • photo309197.jpg
    photo309197.jpg
    444.8 KB · Views: 2
  • photo309240.jpg
    photo309240.jpg
    803.3 KB · Views: 2
  • photo309241.jpg
    photo309241.jpg
    485.3 KB · Views: 2
  • photo309242.jpg
    photo309242.jpg
    522.8 KB · Views: 1
  • photo309243.jpg
    photo309243.jpg
    567.2 KB · Views: 2
  • photo309244.jpg
    photo309244.jpg
    349.5 KB · Views: 1
  • photo309245.jpg
    photo309245.jpg
    639.6 KB · Views: 1
  • photo309246.jpg
    photo309246.jpg
    692.1 KB · Views: 2
  • photo309247.jpg
    photo309247.jpg
    792.9 KB · Views: 1
  • photo309248.jpg
    photo309248.jpg
    951.5 KB · Views: 2
  • photo309249.jpg
    photo309249.jpg
    854.2 KB · Views: 1
  • photo309250.jpg
    photo309250.jpg
    849.1 KB · Views: 1
  • photo309251.jpg
    photo309251.jpg
    842.4 KB · Views: 2
  • photo309252.jpg
    photo309252.jpg
    593.8 KB · Views: 1
  • photo309253.jpg
    photo309253.jpg
    851.3 KB · Views: 2
  • photo309254.jpg
    photo309254.jpg
    808.7 KB · Views: 1

SmallSaddleWedgie

Seaman Apprentice
Joined
Jul 4, 2016
Messages
40
As me and the family arent 'ski' folks... I'm going to cut the ski storage door a bit, and make it a rod locker. Might as well.
 
Top