Normally can figure my issue out from other people posts in the forums but im completely stumped on this. so my force engine has no fuel going to cylinder 2, the plug is completely dry when pulling it, carbs have been cleaned thoroughly, it has good compression, 125ish on all cylinders & it has good spark, so i came to the conclusion it had to be the reeds i pulled them out today there is some light shining through some of the plates, nothing broke. so just to rule it out i switched out the reeds from the other cylinders problem remains and nothing changed. there is some light scoring on the piston walls on cylinder 2, but regardless compression is good. really just lost as to what else it could be at this point. :grumpy: