Please note this thread has been inactive for 90 days. For the best results, please start a new thread.
Results 1 to 14 of 14
  1. #1

    Question yamaha multifunction temp guage issue

    I recently installed a new multi function yamaha guage in my boat. the temp guage flashes constantly.
    i have checked the dip switches on the back and set them accordingling as per a previous response to another post.
    any ideas?

  2. #2
    Supreme Mariner
    Join Date
    Sep 2003
    Location
    Kitty Hawk NC
    Posts
    20,072

    Default Re: yamaha multifunction temp guage issue

    post the engine model number and post where you have the three dip switches now.

  3. #3

    Default Re: yamaha multifunction temp guage issue

    225 ox66. dip switches are on, off, off.

  4. #4
    Supreme Mariner
    Join Date
    Sep 2003
    Location
    Kitty Hawk NC
    Posts
    20,072

    Default Re: yamaha multifunction temp guage issue

    thats not a model number
    the ox66 225 was made from 1997 to at least 05 in a VX,S,SX and an L version.
    need a model number to identify which trim sender you have.
    if you have a 3 wire then set the switchs to 0ff,off,off.
    sometimes you have to flip them on then back off.
    is this a new from a dealer tach or a new to you tach?
    if the switch settings are correct unplug the gray wire at the 4 pin trim harness connector under the hood and see if it still flashes.

  5. #5

    Default Re: yamaha multifunction temp guage issue

    thanks very much rodbolt. i will check this out this weekend and get back with you.

  6. #6

    Default Re: yamaha multifunction temp guage issue

    the guage is brand new from the dealer. one other problem i did mention is that the trim guage also does not work.

  7. #7

    Default Re: yamaha multifunction temp guage issue

    Change the dip switch postions to Off, Off, Off. No change.
    The model # is SX225TX?
    Have not had time to research the trip problem yet.

  8. #8

    Default Re: yamaha multifunction temp guage issue

    Have unhooked the grey wire.
    Have reset the dip switches to off off off
    The model is SX
    No change.....

  9. #9
    Supreme Mariner
    Join Date
    Sep 2003
    Location
    Kitty Hawk NC
    Posts
    20,072

    Default Re: yamaha multifunction temp guage issue

    still need a FULL model number AND the tach part number.
    no tech questions by PM, they wont get answered.
    you have to be trusted by the people that you lie to .

  10. #10

    Default Re: yamaha multifunction temp guage issue

    Sx225tx
    6yr-w0035e200
    Wiring to the Guage
    Connector #1
    Pink/Grey/Black/Orange
    Connector #2
    Blue W/white stripe
    Green
    White W/red stripe
    Greeen W/red stripe

    Wiring to Engine
    Grey wire unhooked

    All dip switches down

  11. #11

    Default Re: yamaha multifunction temp guage issue

    Sx225tx
    6yr-w0035e200
    Wiring to the Guage
    Connector #1
    Pink/Grey/Black/Orange
    Connector #2
    Blue W/white stripe
    Green
    White W/red stripe
    Greeen W/red stripe

    Wiring to Engine
    Grey wire unhooked

    All dip switches down

  12. #12
    Supreme Mariner
    Join Date
    Sep 2003
    Location
    Kitty Hawk NC
    Posts
    20,072

    Default Re: yamaha multifunction temp guage issue

    I dont think the tach is plug and play for that.
    let me check and ill post back tonight or tomorrow.
    no tech questions by PM, they wont get answered.
    you have to be trusted by the people that you lie to .

  13. #13

    Default Re: yamaha multifunction temp guage issue

    We did find out that the trim sender switch is bad. Would that affect the temp guage?

  14. #14
    Supreme Mariner
    Join Date
    Sep 2003
    Location
    Kitty Hawk NC
    Posts
    20,072

    Default Re: yamaha multifunction temp guage issue

    no
    it wont
    no tech questions by PM, they wont get answered.
    you have to be trusted by the people that you lie to .

Similar Threads

  1. Replies: 0
    Last Post: August 12th, 2009, 11:43 AM
  2. Yamaha Multifunction Gauge Temp Indicator
    By slow530 in forum Yamaha & Suzuki Outboards
    Replies: 3
    Last Post: August 19th, 2005, 07:32 AM
  3. Yamaha digital multifunction gauge issue
    By sort in forum Yamaha & Suzuki Outboards
    Replies: 4
    Last Post: September 26th, 2004, 08:28 PM
  4. Temp guage for yamaha
    By striper in forum Yamaha & Suzuki Outboards
    Replies: 1
    Last Post: May 28th, 2002, 04:53 AM
  5. What temp. guage for a yamaha
    By striper in forum Yamaha & Suzuki Outboards
    Replies: 7
    Last Post: March 30th, 2002, 11:31 AM
  1. iboats Forum Directory - Over 100,000 forum posts organized by topic