Please note this thread has been inactive for 90 days. For the best results, please start a new thread.
Results 1 to 5 of 5
  1. #1

    Default removing my volvo stern drive

    hi i want to remove my volvo penta 100b stern drive there are 2 pins that hold it to the transom plate they have locking bolts which i have removed the pins have slots in them do they screw out or knock out as they are semi seized it would be nice to no how to go about removing them thanks mark

  2. #2
    Honorary Moderator Emeritus Don S's Avatar
    Join Date
    Aug 2004
    Location
    Western WA.
    Posts
    62,323

    Default Re: removing my volvo stern drive

    I've been to Volvo schools for many years, and worked on a lot of different drives, but I have never even seen a 100 drive.
    I do have an OEM service manual that you can download, perhaps it will give you the info you need to know.

    http://www.4shared.com/file/13026364...100_Drive.html
    Don S.


    Please, no PM's (Private Messages) regarding boat/engine problems.
    That is what the forums are for.
    Only forum/moderator issues will be answered in PM's.

  3. #3
    Moderator Bondo's Avatar
    Join Date
    Apr 2002
    Location
    The Mouth of the Chaumont River, Ny.
    Posts
    52,669

    Default Re: removing my volvo stern drive

    I've been to Volvo schools for many years, and worked on a lot of different drives, but I have never even seen a 100 drive.
    I do have an OEM service manual
    Ayuh,.... But ya got the Manual, If you ever do run across 1,......

    You're my personal Hero, Don,..........
    Any Grease is Better,..... Than No Grease at All.......

  4. #4
    Captain
    Join Date
    Jun 2008
    Location
    Chisago Lakes, MN
    Posts
    3,411

    Default Re: removing my volvo stern drive

    Quote Originally Posted by kaz20020 View Post
    hi i want to remove my volvo penta 100b stern drive there are 2 pins that hold it to the transom plate they have locking bolts which i have removed the pins have slots in them do they screw out or knock out as they are semi seized it would be nice to no how to go about removing them thanks mark

    As usual, the OEM manual doesn't help at all with this.

    I've never seen a 100 drive either but I would speculate the pin is simply driven in and out. I think the slot is for rotating the pin when it is installed to line up the area that the locking pin goes through.

    this is a picture of the pin from my 1988 275 outdrive. Not the same outdrive but every outdrive after yours, up to the early 90s used this same pin. Yours has a different part number.

    [IMG][/IMG]

    How about a little more info about your project. Pics are always nice.
    '88 Baretta Success 200
    Volvo Penta AQ260/275

    '96 Weeres Suntanner 24
    '01 90hp Johnson

  5. #5

    Default Re: removing my volvo stern drive

    thanks for your help i had an idea that the slots may be there to reline the locking bolts but was not certain. i will post some pics when i remove the leg and maybe some one could identify the model for me thanks again mark

Similar Threads

  1. Removing prop and stern drive.
    By swcejk2002 in forum Mercruiser I/O & Inboard Engines & Outdrives
    Replies: 4
    Last Post: September 8th, 2009, 07:16 PM
  2. Removing VP 280 Stern Drive
    By Hitech in forum Mercruiser I/O & Inboard Engines & Outdrives
    Replies: 13
    Last Post: July 1st, 2008, 07:43 PM
  3. Removing Stern Drive
    By HoverLover in forum Mercruiser I/O & Inboard Engines & Outdrives
    Replies: 3
    Last Post: October 3rd, 2007, 08:32 AM
  4. Problem with removing stern drive - won't move.
    By eba1225 in forum Mercruiser I/O & Inboard Engines & Outdrives
    Replies: 16
    Last Post: August 27th, 2005, 12:32 AM
  5. Removing stern drive from 140 OMC
    By rhartSilverdale in forum Mercruiser I/O & Inboard Engines & Outdrives
    Replies: 3
    Last Post: September 2nd, 2003, 07:58 AM
  1. iboats Forum Directory - Over 100,000 forum posts organized by topic