Steering linkage rubber grommet

[zpalffy]

I have a 35 Hp mercury and I am looking to replace the rubber grommet on the steering link also known as the drag link. They want to sell me the whole drag link for $180 when I only need the rubber grommet. Does anyone know this part number for the rubber grommet ?

 

[Chris1956]

Did you see if it is on the parts list for that motor (or accessories) on the crowleymarine web site?

 

[Fun Times]

Are you looking for either item number 3 or 7 ? https://www.mercruiserparts.com/bam/subassembly/32739/334/150

Engine serial number handy?

 

[dingbat]

If it’s the part on the end you need, it’s a pressed part. Integral to the rod assembly. Not available separately

 

[Yegboats]

If you're looking for the Nylon collar in the rod end of the link it's not sold separately.
If you're looking for the wiper seal/nut cover for the steering cable output shaft you could probably source that separately.

Dometic Cable Gard - Cable Gard® Tilt Tube Seal Nut 7/8"

Dometic Cable Gard - Thanks to the additional protection of the Cable Gard, you can stay focused on the water. This guard fits most outboard tilt tubes for maximum convenience. Designed for outboard tilt tubes with port side threaded end.

www.dometic.com

 

[zpalffy]

Are you looking for either item number 3 or 7 ? https://www.mercruiserparts.com/bam/subassembly/32739/334/150

Engine serial number handy?

Neither

 

[zpalffy]

If you're looking for the Nylon collar in the rod end of the link it's not sold separately.
If you're looking for the wiper seal/nut cover for the steering cable output shaft you could probably source that separately.

Dometic Cable Gard - Cable Gard® Tilt Tube Seal Nut 7/8"

Dometic Cable Gard - Thanks to the additional protection of the Cable Gard, you can stay focused on the water. This guard fits most outboard tilt tubes for maximum convenience. Designed for outboard tilt tubes with port side threaded end.

www.dometic.com

Thank you

 

[zpalffy]

Neither

Thank you

Do you think this tilt tube would work In my situation