1988 14hp evinrude. no place for the muffs!!?!!??!!

P

phatmanmike

Captain
Joined
Oct 24, 2003
Messages
3,869
on this lil motor, i cant use muffs, it has no spot on the motor for that, instead it has a small plate , about 1 inch tall and 4 inches wide, with 3 small holes, RIGHT next to/above the cavitation plate. no room for muffs. anybody had anything like this, and how in the heck do i rinse out the motor other than standing there and holding hose next to motor with my free hand?!?!?!?!?!?! :)
 
Chinewalker

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
Re: 1988 14hp evinrude. no place for the muffs!!?!!??!!

Hi Mike,<br /> If I recall, the 14 was a "budget" motor that used the old style 18/25hp lower unit with the primary water intake in the exhaust outlet on the underside of the cav plate. Best way to flush is to dunk the unit in a bucket of freshwater and run it....<br /> There is a flush attachment for that style, but the last time I tried to use one it was a bit cumbersome...<br />- Scott
 
R

R.Johnson

Rear Admiral
Joined
Sep 24, 2003
Messages
4,446
Re: 1988 14hp evinrude. no place for the muffs!!?!!??!!

Take a look at the post asking about an adapter for a v-4 75
 
E

ezeke

Supreme Mariner
Joined
Sep 19, 2003
Messages
12,532
Re: 1988 14hp evinrude. no place for the muffs!!?!!??!!

Take a look at this tempo flusher. Maybe it will work for you.<br /><br /> Flush
 
You must log in or register to reply here.
Top