1983 Evinrude Power head

C

captjulian

Recruit
Joined
Oct 1, 2003
Messages
4
I am trying to disassemble my Power Head the Motor is still on the Boat and bolted to the lower unit. I have the Carburetors, The Intake Manifold and the Reeds :D off but I cannot figure how to get the Crank Cover off I need to access the Crank to remove one of the Connecting rod / Piston assembles.
 
H

Hooty

Rear Admiral
Joined
Oct 2, 2001
Messages
4,496
Re: 1983 Evinrude Power head

Got a manual?<br /><br />c/6<br />Hooty
 
Joe Reeves

Joe Reeves

Supreme Mariner
Joined
Feb 24, 2002
Messages
13,262
Re: 1983 Evinrude Power head

You must first remove the powerhead from the adapter plate/exhaust housing on which it sits. The powerhead must be off and on the workbench.
 
C

captjulian

Recruit
Joined
Oct 1, 2003
Messages
4
Re: 1983 Evinrude Power head

Thanks Joe I stay in Tampa Florida so thanks from a local . Well that said can you tell me how to remove the Power head from the exhaust housing ?
 
C

captjulian

Recruit
Joined
Oct 1, 2003
Messages
4
Re: 1983 Evinrude Power head

Yeah its a 1983 235 H.P.Evinrude I am not sure where the Bolts that hold the Power head are but :D I see Three in the back and Two in the front on the underside.I tink thats it but I'm not sure?? thanks
 
Chinewalker

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
Re: 1983 Evinrude Power head

I would definitely get a manual before going any further. If you're having trouble getting the powerhead off now, you'll be neck-deep when you get inside... Manuals are CHEAP! Broken parts are not!<br />- Scott
 
C

captjulian

Recruit
Joined
Oct 1, 2003
Messages
4
Re: 1983 Evinrude Power head

Thank you all but I have a "Manual" However it is not detailed anough:D
 
You must log in or register to reply here.
Top