No Power

Firk

Recruit
Joined
Sep 27, 2003
Messages
3
G'day,<br />I have a 1978 Evinrude 25hp Ouboard. She starts fine and runs well ( on land). When out in the water she takes a while to give me full power. She will just idle and sputter with the throttle on full, every now and then she will go to full power and then die, after about half an hour of this she goes to full power and acts normal.....<br />Could anyone tell me what's going on? Is something blocked?<br />Cheer's Shane :confused: <br />shane@firkin.com.au
 

wikelam

Chief Petty Officer
Joined
Apr 21, 2003
Messages
543
Re: No Power

might be running on one cylinder most of the time. had a 40 sea king do this, carb float stuck and would flood the lower cylinder, ran fine on one till you put it in water with a load on it.
 

R.Johnson

Rear Admiral
Joined
Sep 24, 2003
Messages
4,446
Re: No Power

I would check for a bad ignigion coil, or a primer bulb with a defective valve. Had 2 defective primer bulbs lately, not OMC bulbs
 

Firk

Recruit
Joined
Sep 27, 2003
Messages
3
Re: No Power

Thanks Guys.<br />This is a great site.<br />Will check those things out<br />Cheer's Shane.<br />If your ever in Cairns I Owe You A Beer ! :p
 
Top