[captjulian]

I am trying to disassemble my Power Head the Motor is still on the Boat and bolted to the lower unit. I have the Carburetors, The Intake Manifold and the Reeds off but I cannot figure how to get the Crank Cover off I need to access the Crank to remove one of the Connecting rod / Piston assembles.

[Hooty]

Got a manual?c/6Hooty

[Joe Reeves]

You must first remove the powerhead from the adapter plate/exhaust housing on which it sits. The powerhead must be off and on the workbench.

[captjulian]

Thanks Joe I stay in Tampa Florida so thanks from a local . Well that said can you tell me how to remove the Power head from the exhaust housing ?

[93bronco]

what horse power & model # do you have?

[captjulian]

Yeah its a 1983 235 H.P.Evinrude I am not sure where the Bolts that hold the Power head are but I see Three in the back and Two in the front on the underside.I tink thats it but I'm not sure?? thanks

[Chinewalker]

I would definitely get a manual before going any further. If you're having trouble getting the powerhead off now, you'll be neck-deep when you get inside... Manuals are CHEAP! Broken parts are not!- Scott

[captjulian]

Thank you all but I have a "Manual" However it is not detailed anough