rjswenson
Cadet
- Joined
- Jul 19, 2013
- Messages
- 10
Hardware items:
1. 1 ft - 5/16in Vinyl tubing.
2. 2 ea. - 10-24 screws about 3 in long.
3. 1 ea - 1/4-20 screw
3. Ring terminals for wire
See the image for the setup.
Jam the 1/4 screw into the spark plug boot.
Adjust the gap between the screws in the vinyl tubing to the distance you want.
Ground the other wire (alligator click).
Pull the starter rope and observe the spark.
Works great.
Note: may have to modify the screw and/or vinyl tubing dimensions to match your specific needs or material availability.
1. 1 ft - 5/16in Vinyl tubing.
2. 2 ea. - 10-24 screws about 3 in long.
3. 1 ea - 1/4-20 screw
3. Ring terminals for wire
See the image for the setup.
Jam the 1/4 screw into the spark plug boot.
Adjust the gap between the screws in the vinyl tubing to the distance you want.
Ground the other wire (alligator click).
Pull the starter rope and observe the spark.
Works great.
Note: may have to modify the screw and/or vinyl tubing dimensions to match your specific needs or material availability.