4hp merc not pumping water

Rascal4now

Cadet
Joined
Jun 28, 2012
Messages
23
I have searched and searched threads in order to not re-post but could not find an answer to my question. so, first, I apologize if I have re-posted. I tried not to:)

I have taken my 4hp merc apart 4 times and i am only getting hot air pumping out the water hole up under engine. I am about ready to do a cranky fit!! I am going to attach pix in hopes that someone can advise me. The pix of pump is with a brand new impeller. Is the impeller installed the right way? I did put the key way in on the shaft.

2013-06-11 07.30.19 (640x480).jpg2013-06-11 07.30.07 (640x480).jpg2013-06-11 07.29.42 (640x480).jpg
 

Rascal4now

Cadet
Joined
Jun 28, 2012
Messages
23
Re: 4hp merc not pumping water

thank you for the reply. i did have the tube out to put new seal in and check for leaks. is 100% silicone what i should use for tube? will try the drill and let you know.
 

Rascal4now

Cadet
Joined
Jun 28, 2012
Messages
23
Re: 4hp merc not pumping water

okay, got her all back together. I am pretty sure that I didn't have the pin in properly and it wasn't turning. Also, pick up tube may not have been sitting into the base of pump right. Will let you know. Thanks. I am sure getting good at taking this darn thing apart and putting it back together!! Learning lots
 

Rascal4now

Cadet
Joined
Jun 28, 2012
Messages
23
Re: 4hp merc not pumping water

YAY!!! THANKS SOOO MUCH FOR THE ADVICE. She's spitting water but good and runs like a top. True test will be at the lake. Thanks again!!
 
Top