How to remove throttle assembly?

T

thehemi

Seaman Apprentice
Joined
Jun 14, 2010
Messages
42
2007 Bayliner 185 with MerCruiser 4.3

I need to bypass/test the lanyard. How do I remove this assembly? It seems as though the button must come off somehow, but it doesn't seem to come off easily.

IMAG0481.jpg

Thanks!
 
GA_Boater

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
Re: How to remove throttle assembly?

THROTTLE-ONLY BUTTON

1. Place the control handle in the neutral position.
2. Push the throttle‑only button in until it stops.
3. Hold the throttle‑only button in and rotate the remote control handle to the forward
position.
4. Use a flat blade screwdriver to gently pry the throttle‑only button out of the control
handle.

The control handle is painted, so protect it from scratches.
 
T

thehemi

Seaman Apprentice
Joined
Jun 14, 2010
Messages
42
Re: How to remove throttle assembly?

Thanks for the instructions.

I was able to remove the lanyard connector w/o removing the throttle assembly. Although I plan to replace my trim switch before long, so these instructions are going to be necessary anyways. Thanks again.
 
Don S

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: How to remove throttle assembly?

thehemi said:
Thanks for the instructions.

I was able to remove the lanyard connector w/o removing the throttle assembly. Although I plan to replace my trim switch before long, so these instructions are going to be necessary anyways. Thanks again.
Click to expand...

Why?
Seldom is trim/tilt problems due to the switch in the handle.
 
T

thehemi

Seaman Apprentice
Joined
Jun 14, 2010
Messages
42
Re: How to remove throttle assembly?

Don S said:
Why?
Seldom is trim/tilt problems due to the switch in the handle.
Click to expand...

The trim works fine when it engages, but it seems to occasionally not make positive engagement upon first or second press of the button. Figured it might be wearing out, corroded or whatever else.
 
You must log in or register to reply here.
Top