**Need prop for 5hp Gamefisher**

skizman

Seaman
Joined
Feb 25, 2013
Messages
59
Hello. I need a 3-blade prop...7 1/2 x 6.5. Shaft is 1/2" diameter with 9-splines for older 5hp Gamefisher.
Thanks!
 

steelespike

Supreme Mariner
Joined
Apr 26, 2002
Messages
19,069
Re: **Need prop for 5hp Gamefisher**

Sears motors were built by a number of brands. Look for model number perhaps on the mounting bracket.
I'll guess Chrysler or force.
 

steelespike

Supreme Mariner
Joined
Apr 26, 2002
Messages
19,069
Re: **Need prop for 5hp Gamefisher**

Sears motors were built by a number of brands. Look for model number perhaps on the mounting bracket.
I'll guess Chrysler or Force. You might check Ebay some venders do have info on what fits what.
Force and Chrysler both came up with 9 spline pin drive In the prop store. The year was in the 80s
Of course Chrysler became Force in 85.I don't know if Chrysler had splines.
 

skizman

Seaman
Joined
Feb 25, 2013
Messages
59
Re: **Need prop for 5hp Gamefisher**

Thanks! It's a Force engine. I found a couple places that have a prop for it but I just will not pay $80.-$100. for a little prop. I'll keep trying...maybe find a used one. Part# for the prop is 820110A20.
 
Top