30 hp JOHNSON REPAIR 1986 TOO MUCH

opag07

Seaman Apprentice
Joined
Mar 6, 2010
Messages
30
:cool: YOU MUST HAVE REMEMBER ME I HAD THE BLOWN HEAD GASKET AND WASN"T SURE A YEAR AGO TO BE EXACT IF I WERE GOING TO REPLACED IT OR MORE> AFTER A MECHANIC REFUZE TO WORK ON IT> IDECIDED TO DO IT MYSELT AND TOOK MY CHANCES since the bolts were RUSTED> WELL HERE"S THE SCOOP HEAD GASKET< WATER GASKET< TERMOSTRA< FUEL PUMP KIT CARB KIT AND LAST STATOR AND WATER PUMP>> 1-YES, MY READING ON COMP CAME UP LOWER 90 psi, top to 60 psi ) 2= spark on both spark okay 3 my final inspection is fuel.... it smoked once very little... I'm hesitate to let it go to a mechanic boat of couRse and final round, my neighboR also agRees.
Maybe I miss somthing ..............Thanks
Need Help
opag07
 

Attachments

  • iop 004.jpg
    iop 004.jpg
    145.4 KB · Views: 0
  • opih 015.jpg
    opih 015.jpg
    125.4 KB · Views: 0
  • OPLT 006.jpg
    OPLT 006.jpg
    145.5 KB · Views: 0
  • OPLT 009.jpg
    OPLT 009.jpg
    142 KB · Views: 0
  • dec 003.jpg
    dec 003.jpg
    132.1 KB · Views: 0

jasper60103

Commander
Joined
Sep 18, 2008
Messages
2,055
Re: 30 hp JOHNSON REPAIR 1986 TOO MUCH

Nice pics and good job on the dis-assembly. I would check the cylinder walls for scoring. If you can catch your finger nail means problems. Good luck.
 

opag07

Seaman Apprentice
Joined
Mar 6, 2010
Messages
30
Re: 30 hp JOHNSON REPAIR 1986 TOO MUCH

Nice pics and good job on the dis-assembly. I would check the cylinder walls for scoring. If you can catch your finger nail means problems. Good luck.

the walls are okay retorque and jnow 120psi bottom 72psi top at the moment,however wont start... I, m thinking it not gettin fuel somewhere.....run however wont start, i thinking takin it to a local shop,,,,,,,,:watermelon:
 

Attachments

  • water 145.jpg
    water 145.jpg
    132.4 KB · Views: 0
  • water 144.jpg
    water 144.jpg
    131 KB · Views: 0

jasper60103

Commander
Joined
Sep 18, 2008
Messages
2,055
Re: 30 hp JOHNSON REPAIR 1986 TOO MUCH

the walls are okay retorque and jnow 120psi bottom 72psi top at the moment,however wont start... I, m thinking it not gettin fuel somewhere.....run however wont start, i thinking takin it to a local shop,,,,,,,,:watermelon:

Sorry to say, but those compression readings are too far apart, and the top cylinder is too low. :blue:
 
Top