1983 19' Starcraft Islander wiring schematic

B

bookemz9

Recruit
Joined
Oct 19, 2012
Messages
2
I am restoring a 19' Starcraft Islander with a 3.8 litrOMC e V6 and am in desperate need if possible of an original wiring schematic for this model. Any help would be greatly appreciated. I have been told that they don't exist but I'm sure somebody has a reference of somekind.
 
jasoutside

jasoutside

Supreme Mariner
Joined
Dec 20, 2009
Messages
13,269
Re: 1983 19' Starcraft Islander wiring schematic

Wiring schematic for the engine?

For that you'll need the factory service manual. eBay is probably going to be a good source for that.

Wiring for the insturments?

For that you'll just need to figure what you need wired up and go from there. Here is a very general diagram:

11666d1172161592-typical-wiring-schematic-diagram-instrumentpanelwiring.jpg


Then you can start doing some research here:

http://forums.iboats.com/forumdisplay.php?f=23

Welcome to iboats!:D
 
Bob_VT

Bob_VT

Moderator & Unofficial iBoats Historian
Staff member
Joined
May 19, 2001
Messages
26,022
Re: 1983 19' Starcraft Islander wiring schematic

bookemz9 said:
I am restoring a 19' Starcraft Islander with a 3.8 litrOMC e V6 and am in desperate need if possible of an original wiring schematic for this model. Any help would be greatly appreciated. I have been told that they don't exist but I'm sure somebody has a reference of somekind.
Click to expand...
Welcome to iboats.

You were told a lie.......

Get your engine model number and go to this web site http://www.outboardbooks.com/ and get the proper manual for your motor. This will cover the motor and outdrive to include the motor wiring diagram.

What Jason posted is for the gauges etc but not the motor specifics........... you do need both diagrams.
 
B

bookemz9

Recruit
Joined
Oct 19, 2012
Messages
2
Re: 1983 19' Starcraft Islander wiring schematic

jasoutside said:
Wiring schematic for the engine?

For that you'll need the factory service manual. eBay is probably going to be a good source for that.

Wiring for the insturments?

For that you'll just need to figure what you need wired up and go from there. Here is a very general diagram:

11666d1172161592-typical-wiring-schematic-diagram-instrumentpanelwiring.jpg


Then you can start doing some research here:

http://forums.iboats.com/forumdisplay.php?f=23

Welcome to iboats!:D
Click to expand...
Thanks so much for taking the time to help a fellow amateur restorer the info you posted is a help I am on the final stages of my restoration the electrical and the part I have the least experience with, so I now have a reference to check and or fix my work thanx Bookemz9.
 
You must log in or register to reply here.
Top