140hp 3 L omc sterndrive. help removing shift cable

rodinspain

Recruit
Joined
Aug 14, 2012
Messages
4
Hello, I wonder if anyone can help, The stern drive is now off, but i cannot get the shift cable to push through at all. Any idea what im doing wrong ? Ive also split he rubber trying, will it be difficult and expensive to replace when i do manage to remove it ?
 

888

Petty Officer 1st Class
Joined
Jan 7, 2012
Messages
358
Re: 140hp 3 L omc sterndrive. help removing shift cable

if its a stringer,could be up to 500 for a new cable...if u can even find one.
 

rodinspain

Recruit
Joined
Aug 14, 2012
Messages
4
Re: 140hp 3 L omc sterndrive. help removing shift cable

thanks for reply.OH NO :( I only paid 500? for the boat. Any idea how to get it out?? All i know is the boat is a dateline bikini 140hp, 3L, with a omc stern drive, model no. 983486. I was told a 1984 but when ive been searching for info think it could be either a 81 or 85, but tbh i havnt a clue.
 

Howard Sterndrive

Rear Admiral
Joined
Nov 5, 2008
Messages
4,603
Re: 140hp 3 L omc sterndrive. help removing shift cable

there is a clip on the outside held on with a bolt.

after that, you can soak the snot out of both sides with penetrating oil (wash it off completely afterwards though - some types eat the rubber)
then, 2 people - 1 pushing inside and 1 pulling outside can usually get it to slide.

take the battery right out of the boat.
 

rodinspain

Recruit
Joined
Aug 14, 2012
Messages
4
Re: 140hp 3 L omc sterndrive. help removing shift cable

Hello, thanks for taking the time to reply, ive removed the clip, and (almost) sure everything else, the thing wont budge at all ? ill give the penetrating oil a try cheers.
 

rodinspain

Recruit
Joined
Aug 14, 2012
Messages
4
Re: 140hp 3 L omc sterndrive. help removing shift cable

Hello, thanks for taking the time to reply, ive removed the clip, and (almost) sure everything else, the thing wont budge at all ? ill give the penetrating oil a try cheers.
 
Top