cant seperate transome plates

Bondo

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
71,461
Re: cant seperate transome plates

Ayuh,... Welcome Aboard,.... Whatcha workin' on,..??
 
L

lipservice

Cadet
Joined
Jun 24, 2012
Messages
11
Re: cant seperate transome plates

i dont know what im missing only thing left on it is threw hub ehast cover and gimble bearing
 
Bondo

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
71,461
Re: cant seperate transome plates

lipservice said:
any ideas would help
Click to expand...

Ayuh,..... I'm still tryin' to figure out what yer askin',..??..??

The 460 King Cobra is an unsupported drive/ motor combo, as far as New parts go,....
 
L

lipservice

Cadet
Joined
Jun 24, 2012
Messages
11
Re: cant seperate transome plates

I'm not trying to find new parts, I have parts for it. I am trying to separate the two transom plates to get it off because it is cracked in three spots; the plate from the outside of the stern, from the one inside the boat that would sit behind the engine. Everything has been removed from the boat, the engine, the outdrive the steering, all that I have left is the transom plates. I have added a picture so you can see what I am talking about. I am wondering if there is something that I am missing to get this off.
transom3.jpgtransmo1.jpgtransom2.jpg
 
Bondo

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
71,461
Re: cant seperate transome plates

lipservice said:
I'm not trying to find new parts, I have parts for it. I am trying to separate the two transom plates to get it off because it is cracked in three spots; the plate from the outside of the stern, from the one inside the boat that would sit behind the engine. Everything has been removed from the boat, the engine, the outdrive the steering, all that I have left is the transom plates. I have added a picture so you can see what I am talking about. I am wondering if there is something that I am missing to get this off.
View attachment 155522View attachment 155520View attachment 155521
Click to expand...

Ayuh,.... Must be it was glued on, probably with 5200....

I see 4 studs stickin' through the inner plate,...
Well placed hammer blows oughta break things free to come apart...
 
L

lipservice

Cadet
Joined
Jun 24, 2012
Messages
11
Re: cant seperate transome plates

i threaded the nuts on the end took a ten pound sledge and nothin mushromed the bolts the top is kinda louse
 
L

lipservice

Cadet
Joined
Jun 24, 2012
Messages
11
Re: cant seperate transome plates

here it is folks......:mad:i fliped out and shatterd the hole f in gimble housing with 30lb sledge and guess what the dam houseing is still intact to the inside plate some dum *** must of jb welded the housing to gether where the housings slide in togeather........who ever u r that did that thanks dum *** for wrecking my 4 of july......................thanks for trying to help bondo i appreciate it!
 
You must log in or register to reply here.
Top